V Varunme Member Apr 16, 2012 #1 is the below config settings for 18F4550 at 20Mhz in mikroC ? View attachment 63393
G Gobbledok Active Member Apr 16, 2012 #2 Those config settings will set the 18F4550 up using a 20MHz crystal, running the CPU at 48MHz (12MIPS). I answered that way because I was unsure if you wanted the CPU to run at 20MHz or you want to use a 20MHz crystal. Last edited: Apr 16, 2012
Those config settings will set the 18F4550 up using a 20MHz crystal, running the CPU at 48MHz (12MIPS). I answered that way because I was unsure if you wanted the CPU to run at 20MHz or you want to use a 20MHz crystal.
V Varunme Member Apr 16, 2012 #3 ye, i want to run the HID example with this configuration, But i when i connect the PIC burnt with this config, the device manager says, USB device cannot be started.....
ye, i want to run the HID example with this configuration, But i when i connect the PIC burnt with this config, the device manager says, USB device cannot be started.....