I need to take the mains voltage and reduce it to approx 60VAC. I was looking on Radio Shack's website, and I don't see any transformers that are suitable. I didn't think I would, because this is a rather odd voltage.
What are some other solutions? I tried taking some of the coils off of a 120->12VAC transformer, but that just ruined the transformer =). I don't have any problem tearing apart a DC transformer or something like that if that's the answer.
How much current do you need ? The easiest thing I can think of is use a
220 to 120 stepdown transformer. If you put half (120) in you'll get half (60)
out (approx)
How much current do you need ? The easiest thing I can think of is use a
220 to 120 stepdown transformer. If you put half (120) in you'll get half (60)
out (approx)
I need to take the mains voltage and reduce it to approx 60VAC. I was looking on Radio Shack's website, and I don't see any transformers that are suitable. I didn't think I would, because this is a rather odd voltage.
What are some other solutions? I tried taking some of the coils off of a 120->12VAC transformer, but that just ruined the transformer =). I don't have any problem tearing apart a DC transformer or something like that if that's the answer.
The current is very low on the resistors. They will get real hot and Burn up with any wattage above their rated Wattage. What Wattage resistor are you using?
I have another Idea Hook two Transformers in series and tap off of the middle terminal.
I suggest you tell us EXACTLY what you are trying to do, if you're talking extremely low current levels transformers 'might not' be required, but may still be prefered for safety.
I see variacs for sale now and then - might be a solution although overkill if you only need a little current. I paid $10 for my variac - I don't think I could buy a 220/110 transformer for that price. I don't think these provide the isolation you need.
Isolation leads to next suggestion - obtain isolation transfomer (1:1) then use appropriately sized resistors.
Older industrial systems use transformer to step higher voltages down - like the 220/110. While overkill you might find one in a surplus store - or get an electrician to give you one.
As others have said, keep safety in mind here and if you aren't skilled in working with mains voltages get help or stay away.
I need the 60VAC to ring a phone. Very low current (just a few mA) are required, because it's not a regular phone with a ringer, it's a digital phone with a REN value of 0.
I've got it ringing with the 2 resistor solution. Also, I don't have a lot of room in the box the whole thing with be housed in, so an isolation transformer wouldn't be too practical, atleast the ones I've seen that are 20lbs =).
I need the 60VAC to ring a phone. Very low current (just a few mA) are required, because it's not a regular phone with a ringer, it's a digital phone with a REN value of 0.
I've got it ringing with the 2 resistor solution. Also, I don't have a lot of room in the box the whole thing with be housed in, so an isolation transformer wouldn't be too practical, atleast the ones I've seen that are 20lbs =).
How about using two little transformers as below - a few quid each, both of the sort used in transistor radios.
The first one is 120v to 6v - this can supply any logic you may require?
the second is used backwards as a step-up, a 12v to 120v transformer gives 60v out.
There are myriad variations on this.
ps. the step-up transformer needs to be a lower current rating than the step-down in order to ensure the step-down transformer isn't overloaded.
Maybe I didn't understand your circuit ... but this is what I tried.
I took a 120VAC->6VDC transformer, plugged it in, fed the 6VDC into the output of a 120VAC->12VDC transformer, expecting approx 60VAC to come off of the plug connection.
I did that, but I measured like 0.1VAC ... did I do something wrong or totally misinterperet the circuit?