1 mhz oscillator

Status
Not open for further replies.

The frequency does matter, 1 MHz is roughly in the middle of the AM band.
 
Hey that's pretty cool, so I can get 50 oscillators and transmit on 50 frequencies!

If my oscillator has 2 leads do I just hook it up as normal?
 
If your "oscillator" only has two leads, it's probably just a crystal and it will need more circuitry to make it work...
JB
 
psycho-path said:
Hey that's pretty cool, so I can get 50 oscillators and transmit on 50 frequencies!
It broadcasts to as far as anywhere within your house!
Invite all your friends to bring over their AM radios to hear the Morse Code.
 
Just use a spark gap, that will broadcast all the way from near DC into the microwave bands and beyond.
 
What are the advantages of a spark gap? I don't understand what you mean.
Also, is there an easy way of making an oscillator?

p.s. This is a stupid question, but what is the earth or ground wire for in radio devices? Why do you need it if you have an antenna?
 
Last edited:
psycho-path said:
What are the advantages of a spark gap? I don't understand what you mean.
I think Hero is being sarcastic!
Spark transmitters were used in the very early days of radio, they are now banned due to their habit of transmitting on all frequencies at once, so causing interference to all other signals.


psycho-path said:
Also, is there an easy way of making an oscillator?
Yes is the quick answer.

psycho-path said:
p.s. This is a stupid question, but what is the earth or ground wire for in radio devices? Why do you need it if you have an antenna?
The simple answer is that the antenna and the earth make a circuit with the input stage of the reciever (or the output stage of a transmitter).

JimB
 
Status
Not open for further replies.
Cookies are required to use this site. You must accept them to continue using the site. Learn more…