So I tried to make an adaptor that can give me voltage around 9-10 Volts. There are total 5 wires as you can see in the attached image.
I am using a 1000 uF(25V) capacitor parallely after the bridge diodes as said. But the capacitor is heating up and I think the lid/head of the capacitor is...
I need help identifying diodes in a 1980 Marantz Amplifier. There are two diodes in series. They are connected at the cathodes. One is marked A27 and the other simply has an H as the only marking. These were added to the amplifier after production because they are not on the schematic. They are...
I need to add the following level control circuit to an existing device and am wondering how it works...
**broken link removed**
Here we have audio in two places, one going through Q1301, the other above on a buss called signal as well.
The issue here is how to control the level of that...
Hello
I need a diode with less voltage drop like 10SQ050 that is 50V 10A...
But i need something that is rated at least 30A or 40A with 50V or more...
Is there such a diode available?
Also do any of you know what kind of diode is that in image below (in red circle)?
**broken link removed**...
I am using fairly robust D882 and B772 transistors in my design, so I am wondering if I still need 4 damper diodes to protect the transistors as shown below? (Leaving them out saves a little on space and cost.)