Electro Tech is an online community (with over 170,000 members) who enjoy talking about and building electronic circuits, projects and gadgets. To participate you need to register. Registration is free. Click here to register now.
Welcome to our site! Electro Tech is an online community (with over 170,000 members) who enjoy talking about and building electronic circuits, projects and gadgets. To participate you need to register. Registration is free. Click here to register now.
reinstalled board after repairing resistor with muffler epoxy. Ran heavy extension to regular outlet upstairs. Plugged in and started. Standby startup was normal. Pushed start, motor/belt just barely moved before stopping movement. Now error 306; soft start circuit failed to charge the...
tested both resisters. about 75-86 ohms. I guess they function OK. Maybe related to long-term exposure to a GFCI outlet (instructions specifically warn against this).
With only a multimeter, is there to test the 2200uf capacitor?
gives error code 13, related to capacitor circuit per internet...
Pacemaster Digital P.S. #501009 Rev. D.
Standoffs: board is mounted sideways in front of the motor.
Pic attached.
Note: treadmill was plugged into GFCI circuit, could this have caused anything?
thanks guys. No schematic. I found the parts at Newark Electronics. Had to order 10 of the resistors, so I'll solder one in and see if that fixes it, or leads to something else. I might be back.
My treadmill stopped working (initiating the motor start/belt roll). Found ceramic resistor in the capacitor charging circuit cracked. Resistor is labelled:
PW7P
82ohm symbol , then a "J". e.g. 82ohmJ
V5-201
Rectangular in shape, about 1.3" long, about 0.4" deep & wide.
Can anybody point...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.
