View attachment 67832
any ideas?
parts list is as follows
X2 .47uf 275VAC
PM2110 47 uh 10% bourns power inductor (???)
UF4007's
IRFP250's
BZX85C12 12V 1W zener diodes
470Ω 5w / 10kΩ 3w resistors
I tried to power it up from a bench supply at 5 amps 12 to 32 volts. the Flyback used was a
modern CRT flyback with 5+5 center tapped magnet wire (works fine with my 555 driver). if pictures of the driver itself ect or anything else are needed let me know anything to help you help me =)
any ideas?
parts list is as follows
X2 .47uf 275VAC
PM2110 47 uh 10% bourns power inductor (???)
UF4007's
IRFP250's
BZX85C12 12V 1W zener diodes
470Ω 5w / 10kΩ 3w resistors
I tried to power it up from a bench supply at 5 amps 12 to 32 volts. the Flyback used was a
modern CRT flyback with 5+5 center tapped magnet wire (works fine with my 555 driver). if pictures of the driver itself ect or anything else are needed let me know anything to help you help me =)