I'm diagnosing a CCD security camara made by Toshiba. It was used and sold to me through Ebay. It was DOA and when compared to an identical working unit I found that the LDO is burnt. I confirmed it was not outputting any voltage. So here's my dilemma...
burnt LDO PN RT6193 50CG3BR1:
It's a RichTech RT9163, SOT 223 Type I I think, spec sheet here.
https://www.electro-tech-online.com/custompdfs/2010/09/rt916350cgl.pdf
I don't think I found any exact replacement parts. So I'm out looking for an equivalent. So I found something like this on ebay:
**broken link removed**
Question is, will it work? The output pins might be switched. I guess I could solder wires to the board instead.
Any other suggestions? Any leads to a better replacement? Thanks!!
burnt LDO PN RT6193 50CG3BR1:
It's a RichTech RT9163, SOT 223 Type I I think, spec sheet here.
https://www.electro-tech-online.com/custompdfs/2010/09/rt916350cgl.pdf
I don't think I found any exact replacement parts. So I'm out looking for an equivalent. So I found something like this on ebay:
**broken link removed**
Question is, will it work? The output pins might be switched. I guess I could solder wires to the board instead.
Any other suggestions? Any leads to a better replacement? Thanks!!