Continue to Site

Welcome to our site!

Electro Tech is an online community (with over 170,000 members) who enjoy talking about and building electronic circuits, projects and gadgets. To participate you need to register. Registration is free. Click here to register now.

  • Welcome to our site! Electro Tech is an online community (with over 170,000 members) who enjoy talking about and building electronic circuits, projects and gadgets. To participate you need to register. Registration is free. Click here to register now.

500kV switch

Status
Not open for further replies.
I too have seen that vid heaps, I believe it was a problem in shutting off the main supply. One flaw I instantly noticed is that the contacts slowly move away from each other, it was stretching the arc to begin with. Stupid design really.
 
That type of switch is an ABS ( Air break Switch ) isolator.

These switches are not designed to be switched under load conditions.

A small arc and crackle does usually occur.

In this case I think that one of the OCB or VCB contacts failed to open properly and a current was still flowing, hence the huge arc.
 
Status
Not open for further replies.

Latest threads

New Articles From Microcontroller Tips

Back
Top