Yamaha Receiver RX-V795a
The receiver wont turn on, all i hear is two clicks on the relay. I dont have too much experience in electronic repair so i was hoping someone can help me on finding the problem. Ive taken a few pictures of the power board t
Grab the service manual (Google the model number + service manual) , start the receiver up in diagnostics mode and run through the system diagnostics and see if that throws up any clues. If you can't start it up in diagnostics mode, you'll need to read the schematics and test various points for the correct voltages or waveforms.
Thanks for replying,
I couldn't find a service manual online. Are there any components on this power board that has most likely blew out that I can test with my multimeter, or anything I can just try replacing?
Thanks for replying,
I couldn't find a service manual online. Are there any components on this power board that has most likely blew out that I can test with my multimeter, or anything I can just try replacing?