Continue to Site

Welcome to our site!

Electro Tech is an online community (with over 170,000 members) who enjoy talking about and building electronic circuits, projects and gadgets. To participate you need to register. Registration is free. Click here to register now.

  • Welcome to our site! Electro Tech is an online community (with over 170,000 members) who enjoy talking about and building electronic circuits, projects and gadgets. To participate you need to register. Registration is free. Click here to register now.

Yamaha MCX_1000 Lightning damage?

Status
Not open for further replies.

DrDave

New Member
We are an authorized Yamaha servicer and not all that often see the MCX-1000
A customer came in with one this week and claimed it was hit by lightning.
We are trying to determine if this a natural failure or lightning.
We can get it to power up,but no functions.The client status lights strobe one by one then the Timer ,LAN standby,and encoder lights come on then all go off except LAN standby.The display shows LAN standby mode Setting now...and then the display will turn off ,the green LED will return to red on the power button.The unit can also be put into one of the test modes that allows you to test display and fan etc. everybody so far has said replace the main pcb.Cost is $455 .We want to be sure. Power supplies all check ok and no error codes. Anybody have any thoughts? Thanks in advance.
 
Status
Not open for further replies.

Latest threads

Back
Top