WINPIC Problems

I resolved my issue...and it leads to more problems....i load and program and this is what i get:

Programming...
Erasing: CODE ..
Programming and Verifying CODE, 0x000000..0x000017
Verify Error: 000000: read 003FFF, wanted 000185
Verify Error: 000001: read 003FFF, wanted 000186
Verify Error: 000002: read 003FFF, wanted 001683
Verify Error: 000003: read 003FFF, wanted 000185
Verify Error: 000004: read 003FFF, wanted 000186
Verify Error: 000005: read 003FFF, wanted 001283
Verify Error: 000006: read 003FFF, wanted 003007
Verify Error: 000007: read 003FFF, wanted 00009F
Verify Error: 000008: read 003FFF, wanted 001505
Verify Error: 000009: read 003FFF, wanted 00200D
Verify Error: 00000A: read 003FFF, wanted 001105
Verify Error: 00000B: read 003FFF, wanted 00200D
Verify Error: 00000C: read 003FFF, wanted 002808
Verify Error: 00000D: read 003FFF, wanted 0030FA
Verify Error: 00000E: read 003FFF, wanted 0000A0
Verify Error: 00000F: read 003FFF, wanted 0030C8
Verify Error: 000010: read 003FFF, wanted 0000A1
Programming aborted after 17 errors.
ERROR: Programming FAILED !


Any Ideas of what is going on?

Sloetyme said:

Any Ideas of what is going on?

Click to expand...

Yes, JDM's are rubbish - it looks like the PIC isn't getting switched to programming mode, the normal JDM failing.