Continue to Site

Welcome to our site!

Electro Tech is an online community (with over 170,000 members) who enjoy talking about and building electronic circuits, projects and gadgets. To participate you need to register. Registration is free. Click here to register now.

  • Welcome to our site! Electro Tech is an online community (with over 170,000 members) who enjoy talking about and building electronic circuits, projects and gadgets. To participate you need to register. Registration is free. Click here to register now.

Voltage Regulator

Status
Not open for further replies.

chenjk09

New Member
Hi guys,

base on the data sheet I using 33269T-5 and 33268T-33
What is the Max input Voltage?

I supply Input of 9.48V both of the Voltage Spoil. Voltage Input = Voltage output

I can't find any Max Voltage from the data sheet.
hope you guys can help thank.
 
I input voltage of 9.48V and the Regulator spoil
Base on my attached is there anything wrong?
should i put a cap at the input voltage?

Thank
 
Pin 3 is in, pin 2 is out. In the hand-drawn circuit (and presumably the breadboard) you have them reversed.
 
ON-Semi is now owned by TI in the USA.
Nope!
ON Semi is a spinoff from Motorola and they have always had their headquarters in Arizona, not Texas.

National Semi is now owned by Texas Instruments.
 
Status
Not open for further replies.

Latest threads

New Articles From Microcontroller Tips

Back
Top