Sorry to bring to life an old thread. However, I am having a problem with my acer monitor. I have the board out and a few capacitors off. While looking on google to find out about the burn marks I came across this thread. I have the exact! same board along with the exact same burn marks/bad caps. I do not know if the person here has fixed their problem or not. If so, and he/she still reads this, what was wrong? If not, I just wanted to add that on my board the capacitor (up and to the left of the middle one you have circled in your picture) was also blown (CE102 on the board). I am going to buy a few tomorrow and solder them in. I will let you know if it works out!