Continue to Site

Welcome to our site!

Electro Tech is an online community (with over 170,000 members) who enjoy talking about and building electronic circuits, projects and gadgets. To participate you need to register. Registration is free. Click here to register now.

  • Welcome to our site! Electro Tech is an online community (with over 170,000 members) who enjoy talking about and building electronic circuits, projects and gadgets. To participate you need to register. Registration is free. Click here to register now.

Using Oscilloscopes [Deleted]

Status
Not open for further replies.

mechie

New Member
mechie submitted a new article:

Using Oscilloscopes - Oscilloscope Application

OSCILLOSCOPE LEADS
Oscilloscope leads are available as s

Oscilloscope Application

OSCILLOSCOPE LEADS
Oscilloscope leads are available as simple screened cable with 'crocodile clip' terminations or as 'probes' switchable between 'Times One' (X1) and 'Times Ten' (X10), also fixed attenuating X10 probes may sometimes be seen. Other types are rare enough to ignore. When a probe is switched to X10 an internal attenuator reduces the signal seen by the 'scope to one tenth of that at the probe's tip - what you measure with the 'scope needs...

Read more about this article...
 
This resource has been removed and is no longer available.
 
Status
Not open for further replies.

New Articles From Microcontroller Tips

Back
Top