UM3561 Problem with circuit

Check the connections between the IC, pins 1 & 6, and the jumper pins??

From the IC data sheet, J2 (with J1 open) should give three different sounds: No jumper is police siren, jumper to ground (pins 2-3) for ambulance siren, jumper to VDD (pins 1-2) for fire siren.

If J2 is fitted, that should force the machine gun sound, regardless of any J2 setting.

If it's not working with all the correct connections, the IC may be faulty or a fake..

Thanks for your reply
I have used the chip on another circuit and get the same issue so I agree with you that the chip is faulty, that will teach me to buy it on ebay......

You please check the PCB also. See if there is a manufacturing error.

p6= SEL 1
p1= SEL 2

R=~200k p7 to p8

Bought another chip with the same fault which only works with pin 6 connected to ground
The other connections possible produce no sound effect