M Mullemeck New Member Aug 10, 2003 #1 Hi! Does anyone have a schematic for a transmitter an a reciver that operates in 433mhz thx
daviddoria New Member Aug 10, 2003 #2 i dont know your skill level, but i could never get a rx/tx system on ANY frequency to work lol
kinjalgp Active Member Aug 11, 2003 #3 Instead of building one, get the ready made modules. It will reduce a lot of your design and testing time.
Instead of building one, get the ready made modules. It will reduce a lot of your design and testing time.
M Mullemeck New Member Aug 11, 2003 #4 okay if it's that hard i guess it might even be cheaper to buy the modules. thanks anyway
kinjalgp Active Member Aug 11, 2003 #5 Yes, you'll find ready RF modules quite cheaper than building one using discrete components. See www.rentron.com for schematics based on these RF modules.
Yes, you'll find ready RF modules quite cheaper than building one using discrete components. See www.rentron.com for schematics based on these RF modules.