Continue to Site

Welcome to our site!

Electro Tech is an online community (with over 170,000 members) who enjoy talking about and building electronic circuits, projects and gadgets. To participate you need to register. Registration is free. Click here to register now.

  • Welcome to our site! Electro Tech is an online community (with over 170,000 members) who enjoy talking about and building electronic circuits, projects and gadgets. To participate you need to register. Registration is free. Click here to register now.

transistor saturation simulation

Status
Not open for further replies.

MrDEB

Well-Known Member
Several months ago I was confused about how to set up a transistor to check/calculate for saturation.
Using TINA simulation I have been using to test my circuits.
And yes the transistor saturation is right on. the current draw with a shorted collector to emitter is close to without the short.
201.63ua without short and 204.55ua with short
just a simple suggestion seeing how we are getting lots of homework assignments on this form.
 

Attachments

  • Capture5-5-2009-5.35.32 AM.jpg
    Capture5-5-2009-5.35.32 AM.jpg
    206.8 KB · Views: 328
  • Capture5-5-2009-5.35.11 AM.jpg
    Capture5-5-2009-5.35.11 AM.jpg
    206.5 KB · Views: 228
If you measure the voltage from the transistor collector to emitter, you will see the saturation voltage, which is the parameter often given on the data sheet.
 
Status
Not open for further replies.

Latest threads

New Articles From Microcontroller Tips

Back
Top