TMR0 TMR1 TMR2

Hi,

I'm trying to read the 18F2431 (internal osc) data sheet regarding TMRs. Why are there three different types? TMR2 shows internal oscillator, but mentions CCP1/2. Will TMR2 work along side the PWM motor control pins? (I use PWM) If not which TMR should I use? I use Oshonsoft basic.

I also have a similar thread open.

Camerart.

Your choice.... all will do what you need TMR0 , 1 or 5... Leave TMR 2 for the CCP module..

Ian Rogers said:

Your choice.... all will do what you need TMR0 , 1 or 5... Leave TMR 2 for the CCP module..

Click to expand...

Hi Ian,

Blinking complicated!! Ok, thanks. I'll post the full program into my other post you have been working on, and you will see there is PWM using CCP1/2.

C.