Hey guys, I'm new to this forum but I need some help with a project.
Basically I have a pneumatic solenoid that's being run to a 12v DC power source and is triggered by a simple momentary push button switch. What I need is a timer or something where I can switch it on and after a 3-5 second delay the power goes to the solenoid which causes it to open. Any help would be appreciated and I can compensate the first person to send me plans for a prototype. I'm not very good with regular schematics so you'd have to dumb it down for me. (I'm a mechanical engineer by trade.)
Also the overall dimensions cannot be larger than 2.5 cubic inches.
Basically I have a pneumatic solenoid that's being run to a 12v DC power source and is triggered by a simple momentary push button switch. What I need is a timer or something where I can switch it on and after a 3-5 second delay the power goes to the solenoid which causes it to open. Any help would be appreciated and I can compensate the first person to send me plans for a prototype. I'm not very good with regular schematics so you'd have to dumb it down for me. (I'm a mechanical engineer by trade.)
Also the overall dimensions cannot be larger than 2.5 cubic inches.