I think I got the idea of what you mean, You can make it but by 1 circuit. You can set up 2 NOT gates, that send a signal to a NAND gate with LED connected to its ouput, when the input in the NOT gates are 1 and 1, the output will be 0 and 0, then the input to the NAND would be 0 and 0, making the output 1 and the LED will glow.
This is what I could make up for you, I hope this is what you meant anyway. You're gonna need a pull down resistor in the inputs of the NOTs, use a 7404 for the NOT and a 7400 ic for the NAND.