Electro Tech is an online community (with over 170,000 members) who enjoy talking about and building electronic circuits, projects and gadgets. To participate you need to register. Registration is free. Click here to register now.
Welcome to our site! Electro Tech is an online community (with over 170,000 members) who enjoy talking about and building electronic circuits, projects and gadgets. To participate you need to register. Registration is free. Click here to register now.
hi...i have a ckt which gives temperature in volts in the range of 0 to 5v every second. i need to use pic16ff to display this on an lcd as well as store these values every second on a thumb drive or any external memory...pls help
thanks
use the adc module on the pic 16fXX ic and then link up it with the lcd in 8 bit or 4 bit mode. use the SPI module in the PIC for memory card interface.
Note: the interface with memmory card will be difficult with the 16f series having limited RAM space. i recommend 18F series or higher for MMC interface.
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.
