Hi,
I know this is an old thread, but I thought this might be a good place to put a query I have. I'm hoping one of you lot may know where I should start with my problem.
I have an Eltax Active subwoofer I bought a few years ago (since it was cheap). Recently it cuts out after 10-15 minutes, or following a loss of LFE signal from the soundtrack (so when it goes into standby mode). The only way to get it to work again is by either turning it on and off - or by switching the phase from 0-180 degrees or vica versa (or putting from 0-180 then back again).
I'm assuming there's a problem with the amplifier itself given the symptons. I have emailed Eltax for a schematic, but have had no luck. Any chance that any of you experts may have an idea what where to start?
My electronics knowledge is limited, but I'm confident given some pointers I may be able to work things out!
Any help would be really appreciated as this is really frustrating! lol
Thanks