I have seen many circuits using the 2N2222 transistor (correct me if it isn't one). one of them uses it to control electrical appliances. It says it can be substituted by a BC148. So I just wanted to know can the BC148 be used as a general substitute for 2N2222 or is it just the case in this one?
I have seen many circuits using the 2N2222 transistor (correct me if it isn't one). one of them uses it to control electrical appliances. It says it can be substituted by a BC148. So I just wanted to know can the BC148 be used as a general substitute for 2N2222 or is it just the case in this one?
The 2N2222 can be replaced without problems by the BC337. The 2N2222 has a TO18A package (similar to TO92, but metal can) and the BC337 has a TO92 package. That one can handle up to 800mA.
The BC148 was used 44 years ago. I have some. It has discontinued about 34 years ago.
The latest one is the BC548 in a TO-92 case.
The 2N3904 is the same but its collector and emitter are reversed.
Use a 2N4401 if you want the same high output current of an old 2N2222.
In the OP's circuit this is true because it only needs to pass 60 mA. However the 2N3904 is not a universal replacement for 2N2222 because of a lower current rating.
In the OP's circuit this is true because it only needs to pass 60 mA. However the 2N3904 is not a universal replacement for 2N2222 because of a lower current rating.
They may be commonly available where you are, but BC series transistors are commonly available in Europe, which is where they come from - far easier than non-European 2N series.
They may be commonly available where you are, but BC series transistors are commonly available in Europe, which is where they come from - far easier than non-European 2N series.
BC 148/158 were also manufactured in India and now a days, we get BC547/BC557 and BC548/BC558- in local make as well as Philips, in TO92 case.
the 2N2222 and likes are also made In India and from Taiwan.
Industrial usage, they prefer metal can and for commercial, TO92.