stack overflow .. help :( mikrobasic .. sleep mode

program asdf
dim counter as word
dim counter2 as word
sub procedure Interrupt()
Inc(counter) ' Increment value of counter on every interrupt

TMR0 = 0
INTCON = 0x20 ' Set T0IE, clear T0IF
end sub

main:
OPTION_REG = 0x84 ' Assign prescaler to TMR0

TRISB = 0x0f ' rb0-rb3 input, rb4-rb7 output
PORTB = 0x0f '
TRISC = 0
PORTC = 0
TMR0 = 0 ' Timer0 initial value
INTCON = 0xA0 ' Enable TMRO interrupt
counter = 0 ' Initialize counter
counter2 = 0

while TRUE

if (portb.0 = 1) then
Inc(counter2)
gosub aa
end if

if (counter2 = 100) then
portb.4 = 0
counter2 = 0
end if

wend

aa:

if (counter > 10 ) then
portb.4 = 1
end

if (counter > 50) then
portb.4 = 0
counter2 = 0
end if

return

end.

I always receive on ISIS message box "stack overflow in call instruction" what should i do ?

This is the flow of program I want to make .

if portb.0 = 1 then counter2 will increment and it will call the sub program aa . and once counter2 reached 100 it will automatically turn-off portb.4 where program aa is located .


hope you guys help me ! thnx .

You accidentally typed "end" instead of "end if" after the first "if" in your "aa:" subroutine. Try this -