Continue to Site

Welcome to our site!

Electro Tech is an online community (with over 170,000 members) who enjoy talking about and building electronic circuits, projects and gadgets. To participate you need to register. Registration is free. Click here to register now.

  • Welcome to our site! Electro Tech is an online community (with over 170,000 members) who enjoy talking about and building electronic circuits, projects and gadgets. To participate you need to register. Registration is free. Click here to register now.

spread spectrum doubt

Status
Not open for further replies.
BPSK and QPSK are modulation schemes that are well known to give close to the best power efficiency available along with reasonable bandwidth efficiency.

The direct spread spectrum uses either BPSK or QPSK modulation technique. On the other hand, The Frequency hopping spread spectrum uses FSK which is poor in performance.

For example: a 4-FSK demodulator that uses conventional limiter/discriminator techniques without coding, the expected power efficiency performance will be much worse than QPSK.

In short, DIRECT SPREAD SPECTRUM uses
(1) Efficient modulation (PSK)
(2) Broad modulation bandwidth and continuous transmission.
(3) Quick synchronization
(4) Low power spectral density minimizing interference.
 
Status
Not open for further replies.

Latest threads

New Articles From Microcontroller Tips

Back
Top