SNES Multi Out

Hello everyone.

I am looking to make my own multi out conector. Does anyone have this and is there any way you can use a continuity tester to pin point the connecors for the left and right audio and video. so I can pinpoint my connections to the mainboard and solder in my own hook up?

[/img][/list]



I would appreciate this very much. Thanks, Bravada.

If the PC board is two layer, you can follow the wiring visually. If it is multilayer, you will have to randomly probe the board until the connection is found.

If it has regular left/right audo and composite/svideo for the video, you can buy a multiple distribution amp, they are around 20USD or so.

Bravada said:

Hello everyone.

I am looking to make my own multi out conector. Does anyone have this and is there any way you can use a continuity tester to pin point the connecors for the left and right audio and video. so I can pinpoint my connections to the mainboard and solder in my own hook up?
I would appreciate this very much. Thanks, Bravada.

Click to expand...

Also, video signal is 75-ohm so you'll probably need an amplifier if you want to split it