Continue to Site

Welcome to our site!

Electro Tech is an online community (with over 170,000 members) who enjoy talking about and building electronic circuits, projects and gadgets. To participate you need to register. Registration is free. Click here to register now.

  • Welcome to our site! Electro Tech is an online community (with over 170,000 members) who enjoy talking about and building electronic circuits, projects and gadgets. To participate you need to register. Registration is free. Click here to register now.

simple mosfet power amplifier circuit

Status
Not open for further replies.

sanmoy

New Member
I need a simple mosfet power amplifier which will amplify a input sine wave ( 60Hz, 15v, few mA) to 120v, 2A sine wave. A wein bridge oscillator will supply the input signal.

This is required for a sine wave inverter which has a power supply of 120v dc. (not like common 24v dc from a battery) Please provide a diagram with component details.

Thanks in advance.
 
What you are requiring is an audio power amp capable of delivering 240 watts. Or slightly more.

Since your power supply of 120 Vdc is insufficient to provide the 320 Vpk-pk required by a 120 Vrms sinewave, you'll have to use an autotransformer at the output to elevate the 42 Vrms from the amplifier output to 120 Vrms

Alternatively, you could boost the 120 Vdc to 320 Vdc, but that would be more complex and dangerous.

I'm assuming theoretical, lossles output transistors. Most likely the voltage would have to be aprox 10Vdc higher.
 
Last edited:
Status
Not open for further replies.

Latest threads

New Articles From Microcontroller Tips

Back
Top