Continue to Site

Welcome to our site!

Electro Tech is an online community (with over 170,000 members) who enjoy talking about and building electronic circuits, projects and gadgets. To participate you need to register. Registration is free. Click here to register now.

  • Welcome to our site! Electro Tech is an online community (with over 170,000 members) who enjoy talking about and building electronic circuits, projects and gadgets. To participate you need to register. Registration is free. Click here to register now.

Simple Field Strength Meter [Deleted]

Status
Not open for further replies.

ElectroMaster

Administrator
ElectroMaster submitted a new article:

Simple Field Strength Meter - This Field Strength Meter is simple and also quite sensitive. It uses an ordinary digital voltmeter

This Field Strength Meter is simple and also quite sensitive. It uses an ordinary digital voltmeter to measure signal strength. The VM should be set to the lowest dc volts range for maximum sensitivity. This is normally 200mV DC for most meters.

I have tried this at VHF and was quite pleased with the results. L1 was 7 turns on a quarter inch former with ferrite slug. This covered the UK FM band. A digital multimeter, as opposed to an analogue signal meter has several advantages in this...

Read more about this article...
 
Status
Not open for further replies.

Latest threads

New Articles From Microcontroller Tips

Back
Top