Siemens large industrial PLC parts

rjenkinsgb

Well-Known Member
Most Helpful Member
Hi,
I'm disposing of some old Siemens S5-135 racks and modules I've been saving as spares for some time.

These are 19" rack cardframes with fans attached below (so around 10u total height?), then a 24V 951 PSU module, CPU 942 module and various I/O cards that fit in the racks.

The modules are the same series as the ones in the photo below, but like new, and in a 19" rack rather than panel mounting; also varied I/O section.

All virtually unused, clean and good working order. The rack modules are all 24V DC, from PSU input through logic I/O modules.

32 inputs or outputs per logic I/O card.

If anyone is interested in a complete rack or any modules, the cost is basically packing and shipping; I just need to clear some stuff!

 
The port on the CPU has RS422 in and out. I can't remember offhand if that is programming only, or can be used for other communications ?
 
Cookies are required to use this site. You must accept them to continue using the site. Learn more…