R29 and 32 are indeed 750 and 7500.
R30 and 31 are both 300. (I'd written 3k? on the schematic, as one of the repairmen had crossed out 300 and written 3k in my manual on the parts list. The numbers on the schematic are not what I've measured, but are what's spec'd.)
I'm guessing R32 was replaced in the past--it's neither the correct value or tolerance-- and looks nothing like the other resistors--per the kit's part list. I did not replace it at this time. R29, on the other hand, I DID replace a couple weeks ago when I started this. Don't remember for sure what it measured, but it looked original and and wasn't within spec.
Thanks.