A auror New Member Oct 28, 2004 #1 hi guys, i need to know is it possible to send a signal from a priximity sensors to a PC's parallel port through RF
hi guys, i need to know is it possible to send a signal from a priximity sensors to a PC's parallel port through RF
A auror New Member Oct 30, 2004 #3 the distance is around 10m, the sensors are fitted on a rc car to avoid obsatacles and the type of sensors is ultrasonic. if possible can i have the circuit of this sensor. thanks for ur reply
the distance is around 10m, the sensors are fitted on a rc car to avoid obsatacles and the type of sensors is ultrasonic. if possible can i have the circuit of this sensor. thanks for ur reply
F free1 New Member Jun 10, 2005 #5 auror said: hi guys, i need to know is it possible to send a signal from a priximity sensors to a PC's parallel port through RF Click to expand... Hi there, U need to make sure that the RF transmitter output connected to the parallel port at 0V (logic 0) and +5V (logic 1). Please check the website below for some info on serial port/parallel port interfacing. http://www.geocities.com/bagtool/parallel_basic.html http://www.geocities.com/bagtool/serial_basic.html free 8)
auror said: hi guys, i need to know is it possible to send a signal from a priximity sensors to a PC's parallel port through RF Click to expand... Hi there, U need to make sure that the RF transmitter output connected to the parallel port at 0V (logic 0) and +5V (logic 1). Please check the website below for some info on serial port/parallel port interfacing. http://www.geocities.com/bagtool/parallel_basic.html http://www.geocities.com/bagtool/serial_basic.html free 8)