I see. I put in +6V and 0 (battery) and its going to run on +9/0 V, just trying it first on a veroboard before I do 8 of them. So it wants to have a balanced voltage?
Shall I rather go for another chip, LM358 or so?
edit: r100k goes to an LM35, had 180mV. But I pulled the resistor out, just to check, same. Put 1.5V onto the input of the LM741, still the same. Shortened the 20k resistor, voltage went down (same both ends of the 20k, thats what its meant to do). But still, seems to go into saturation? (suppose 4.5 is max when you put a nominal 6V accupack on)