Continue to Site

Welcome to our site!

Electro Tech is an online community (with over 170,000 members) who enjoy talking about and building electronic circuits, projects and gadgets. To participate you need to register. Registration is free. Click here to register now.

Register Log in
  • Welcome to our site! Electro Tech is an online community (with over 170,000 members) who enjoy talking about and building electronic circuits, projects and gadgets. To participate you need to register. Registration is free. Click here to register now.

Sending data using ENC28J60 and PIC18F4550

Status
Not open for further replies.
S

sawula

New Member
I am trying to build two circuits and connect them via ethernet. ENC28J60 and PIC184550 are used at both end and mikorc Pro for PIC as the compiler. Before going to anything bigger I want to send simple temperature data (LM35) from Tx to Rx and display them on LCD. In the mikroc help file I found an example of processing incoming data packets. But there is no information about how to send data via ethernet.

Can anyone help me to find a solution?
 
Status
Not open for further replies.

Similar threads

S
  • Question
SD Card Raw Data Read
Replies
6
Views
3K
Suraj143
S
B
  • Question
Temperature controlled fan using PIC16F877a (in assembly language)
Replies
2
Views
449
Dan Soze
D
P
  • Question
Using cheap BLE modules?
Replies
7
Views
2K
rjenkinsgb
rjenkinsgb
J
  • Question
Why External Steering Request (XSR) J1939 message has checksum message within the 8-byte Data Field?
Replies
1
Views
1K
Diver300
D
P
Is HM-10 RX pin receiving data to be transmitted?
Replies
14
Views
2K
Nigel Goodwin
Nigel Goodwin

Latest threads

New Articles From Microcontroller Tips

Back
Top