SD/SDHC FAT32 Library

[CCD]

Hi guys,

here is my SD/SDHC FAT32 library tested with microS/SDHC cards. Though the project is written for AVR controlle, the SD routines and FAT32 library can be convertd easily to any other controller. Have a look:
Design with Microcontrollers: SD/SDHC Card Interfacing with ATmega8 /32 (FAT32 implementation)

 

[Mea]

Last version (2.3) only for ATmega32 ?

 

[CCD]

Last version (2.3) only for ATmega32 ?

I meant to say there that the last version (and the previous one, 2.2) is not for ATmega8, since all other previous versions were also applicable for ATmega8, too. The version 2.3 needs Flash > 8KB. It can be used on controllers having RAM and flash bigger than that (1KB RAM and 16KB flash onwards).

Thanks for showing that confusing sentence, I've removed now the "only" word from it and also added a small note.

EDIT: 1KB RAM (by mistake, I had mentioned it as 2KB)

 

[nsaspook]

Hi guys,

here is my SD/SDHC FAT32 library tested with microS/SDHC cards. Though the project is written for AVR controlle, the SD routines and FAT32 library can be convertd easily to any other controller. Have a look:
Design with Microcontrollers: SD/SDHC Card Interfacing with ATmega8 /32 (FAT32 implementation)

Did you use my idea for the socket.

 

[CCD]

Did you use my idea for the socket.

Nice one!!