Bill
1. the target Vdd: 4.96, Vpp:12.62, 2Vpp: 12.30
2. just have c3 installed, don't have a 33uf in the part's box, but do have a 47uf, will that work??
3. using serial, com 1 and fifo is off.
4. 2nd chip reprogrammed got this:
Connecting to MPLAB ICD 2
ICD0019: Communications: Failed to open port: (Windows::GetLastError() = 0x2, 'The system cannot find the file specified.
')
ICD0021: Unable to connect with MPLAB ICD 2
MPLAB ICD 2 Ready
ICDWarn0034: Please ensure that your system's serial FIFO buffers are disabled.
Connecting to MPLAB ICD 2
...Connected
Setting Vdd source to MPLAB ICD 2
ICD0082: Failed MPLAB ICD 2 operation
MPLAB ICD 2 Ready
Connecting to MPLAB ICD 2
...Connected
Setting Vdd source to MPLAB ICD 2
...Reading ICD Product ID
Running ICD Self Test
...Passed
MPLAB ICD 2 Ready
Programming Target...
Verifying...
...Verify Succeeded
...Programming succeeded
24-Aug-2007, 19:06:45
MPLAB ICD 2 Ready
it did not "build" but it "programed" fine, I think??
I installed the power led and that does help to let me know that there is power on the Firefly. Just waiting for the word back if the 47uf will work or not. The next closes is 10uf.
TIA
3v0
that is what happens before step 4 ICD0019: Communications: Failed to open port: on the hello world instructions. after you set the comm then you "connect" and then step 5.