Continue to Site

Welcome to our site!

Electro Tech is an online community (with over 170,000 members) who enjoy talking about and building electronic circuits, projects and gadgets. To participate you need to register. Registration is free. Click here to register now.

Register Log in
  • Welcome to our site! Electro Tech is an online community (with over 170,000 members) who enjoy talking about and building electronic circuits, projects and gadgets. To participate you need to register. Registration is free. Click here to register now.

RB0 as interrupt

Status
Not open for further replies.
N

nitE

New Member
i would like to ask.. if i had configure RB0 as interrupt.. thats mean i cant use it as input in my coding.. is that right..?
 
nitE said:
i would like to ask.. if i had configure RB0 as interrupt.. thats mean i cant use it as input in my coding.. is that right..?
Click to expand...

hi,
Before and after the 'change on' interrupt you can test the state of PORTB.0.

Also you can disable/enable the PORTB.0 intr within your program.

Is this what you mean.?
 
Status
Not open for further replies.

Similar threads

M
  • Question
TM4C1294 UART interrupt handler registration
Replies
2
Views
3K
allone
A
P
Trying to setup a 125uS interrupt.
Replies
1
Views
3K
rjenkinsgb
rjenkinsgb
P
What to use as EOL?
Replies
5
Views
4K
MrAl
M
Jon Wilder
  • Question
PIC-AS DB Assembler Directive Only Building First Two Bytes Of String
Replies
3
Views
3K
Ian Rogers
Ian Rogers
D
GP2 as output on PIC10F200
Replies
15
Views
2K
MaxHeadRoom78
MaxHeadRoom78

Latest threads

New Articles From Microcontroller Tips

Back
Top