Continue to Site

Welcome to our site!

Electro Tech is an online community (with over 170,000 members) who enjoy talking about and building electronic circuits, projects and gadgets. To participate you need to register. Registration is free. Click here to register now.

  • Welcome to our site! Electro Tech is an online community (with over 170,000 members) who enjoy talking about and building electronic circuits, projects and gadgets. To participate you need to register. Registration is free. Click here to register now.

Rant - fixing old stuff (heating pad)

Status
Not open for further replies.

KeepItSimpleStupid

Well-Known Member
Most Helpful Member
The pad could be 50 YO or more. I need to ask mom. The cord broke at the control. No surprise. I bought a rubber appliance cord and cut off the end. Undid two screws on the back of the control. Unsoldered two wires and undid the strain relief and presto - back in service.

The contacts are really beefy. The only change was to add some Conducto-Lube.

I have a more modern pad that's also broken and probably can't be fixed.
 
Status
Not open for further replies.

New Articles From Microcontroller Tips

Back
Top