kingsleyloo
New Member
Guys,im a newbie of electronic student. I need all of u to help me have a look about my this design question since i really cant find any clearer example to refer><(my lecturer told that it's actually related to state machine..=_=)
The intersection junction of a railway and a road. The flashing light and warning bell are to be turned on when a train enters Area 2 either from Area 1 or Area 3; and turn off when a train leaves the intersection. The flashing light and warning bell will turn on for 5 seconds and 3 seconds respectively. Three signals P1, P2 and P3 are generated when a train is in Area 1, 2 and 3 respectively.
Design a railway-crossing indicator that meets the design specification above.
Hints:
(a) Your circuit should have 5 outputs, 3 signals for Area 1, Area 2 and Area 3. Use LEDs to simulate as outputs.
(b) The railway-crossing indicator has 4 states: No train approaching, Train approaching, Train at intersection junction and Train left the intersection junction.
(c) Use counters to keep track of time for the flashing light and warning bell signals.
(d) Use LEDs to simulate P1, P2 and P3 signals.
(e) Use switches to simulate the presence of train in respective area.
Can anyone give me any information or suggestion about this design? thanks a lot
The intersection junction of a railway and a road. The flashing light and warning bell are to be turned on when a train enters Area 2 either from Area 1 or Area 3; and turn off when a train leaves the intersection. The flashing light and warning bell will turn on for 5 seconds and 3 seconds respectively. Three signals P1, P2 and P3 are generated when a train is in Area 1, 2 and 3 respectively.
Design a railway-crossing indicator that meets the design specification above.
Hints:
(a) Your circuit should have 5 outputs, 3 signals for Area 1, Area 2 and Area 3. Use LEDs to simulate as outputs.
(b) The railway-crossing indicator has 4 states: No train approaching, Train approaching, Train at intersection junction and Train left the intersection junction.
(c) Use counters to keep track of time for the flashing light and warning bell signals.
(d) Use LEDs to simulate P1, P2 and P3 signals.
(e) Use switches to simulate the presence of train in respective area.
Can anyone give me any information or suggestion about this design? thanks a lot
Last edited: