Speakerguy
Active Member
When undergoing programming via ICSP, what state are the device pins not used for ICSP held in?
Please say high Z
Please say high Z
Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
And the loading of rb6 and rb7 is all you got to worry about . not used no 18xxxx but i have the 16f887 and the pic32Another consideration with MCLR/VPP is that when the PICmicro device is programmed, this pin
is driven to approximately 13V and also to ground. Therefore, the application circuit must be isolated
from this voltage provided by the programmer