project help *UPDATED*
you know this circuit on the first page
i finaly got it to work with the lm3619
what i did was take out Q3 and its capacitor and the wire going to Q3 was sent to pin 5 of the lm3916
the only other change i had to do was change the Vref by having two 1K resistors in series from pins 7 and 8 to ground and adding pin eight to the middle of the two resistors
it works really great now at good sound levels
the only thing i have now is that 4 leds at the start are on constantly and i want to know how to turn them off and react to sound?
do i add a bigger resistors to pin 5 to ground?
or something else