C Cyborg New Member Mar 30, 2004 #1 Is 6 volts good enough to control both microcontroller and two servos(Standard)?
R RDS New Member Mar 30, 2004 #2 6 volts is enough to do all of that and lift a watermelon with a solenoid, IF you have 25 amps. Current and voltage are not exclusive, friend. Can't ask about one without knowing the other.
6 volts is enough to do all of that and lift a watermelon with a solenoid, IF you have 25 amps. Current and voltage are not exclusive, friend. Can't ask about one without knowing the other.