R rasheedix New Member Apr 17, 2008 #1 Hello all I need to make small PBX for the three or five line telephone in to control all the line caming in one place . Many Thanks
Hello all I need to make small PBX for the three or five line telephone in to control all the line caming in one place . Many Thanks
dknguyen Well-Known Member Most Helpful Member Apr 17, 2008 #2 (Assuming this is a school project) don't ask us to do all your work for you. We won't. You have to show that you have put some effort into it by showing us what you have so far. This is your project, not ours.
(Assuming this is a school project) don't ask us to do all your work for you. We won't. You have to show that you have put some effort into it by showing us what you have so far. This is your project, not ours.
P petrv New Member Apr 17, 2008 #3 have a look at MT8808 IC from Zarlink (formerly MITEL) it is a cross-point switch, ideal for making a small analog PBX (up to 8 lines). You will need a microcontroller to control that chip and also a line interface circuit for each phone line connected. Petr
have a look at MT8808 IC from Zarlink (formerly MITEL) it is a cross-point switch, ideal for making a small analog PBX (up to 8 lines). You will need a microcontroller to control that chip and also a line interface circuit for each phone line connected. Petr
BaCaRdi Member Apr 17, 2008 #4 I would base this on open-source software as well, have you looked into Asterisk https://www.asterisk.org/ I really have to say, it is amazing! Best of luck, -BaC
I would base this on open-source software as well, have you looked into Asterisk https://www.asterisk.org/ I really have to say, it is amazing! Best of luck, -BaC