I am trying to debug a 12F509 with PK2 and it appears that MPLAB is trying to place the debug executive at location 0x600. The 12F509 only has memory up to 0x3ff. I've posted on Microchip about this but as it's weekend I thought I would see if anyone here can help.
This is the output window,
edit, forget it, it looks like this device needs additional circuitry before you can debug.
Mike.
This is the output window,
Initializing PICkit 2 version 0.0.3.30
Found PICkit 2 - Operating System Version 2.20.1
Target power detected ( 4.79V)
PICkit 2 Ready
Resetting
Programming Target (16/08/2008 3:01:25 PM)
Erasing Target
Programming Program Memory (0x0 - 0xF8)
Verifying Program Memory (0x0 - 0xF8)
Programming Debug Executive (0x-600 - 0x3FF)
Verifying Debug Executive (0x600 - 0x3FF)
PK2Error0027: Failed verify (Address = 0x600 - Expected Value 0x5E4 - Value Read 0x4)
PICkit 2 Ready
edit, forget it, it looks like this device needs additional circuitry before you can debug.
Mike.
Last edited: