PIC16F688 voltage and current display

Status
Not open for further replies.
M

macobt

New Member
Hi to all
I want to built it this voltage and current display but on schematic are not shown pins conected to lcd display,I have wrote to author he tell me too look in source code for pins conections,I dont know to read source codes
Please help me to solve this problem.
Here is link to web site:**broken link removed**
And pictures with schematic.
Regards macobt
 


hi
This is what the designer means, extract from the C code.
If you have a problem ask.



EDIT:
Bit more info.
View attachment lcd1[1].pdf
 
Last edited:
Thanks but?

Thanks but I need all pins from the PIC16F688 with names,that is beter for me to understand and to wiring to lcd.
I know that I ask stupid qwestions
Here is a picture.
 

Attachments

  • lcd1-circ.gif
    14.3 KB · Views: 534
macobt said:
Thanks but I need all pins from the PIC16F688 with names,that is beter for me to understand and to wiring to lcd.
I know that I ask stupid qwestions
Here is a picture.
Click to expand...

hi,
Attached is a clip from the 16F688 datasheet, it shows the pin names.

If you compare it with the diagrams I posted earlier you will see that the pin names correspond to the clip.

You should download the free datasheet for the 16F688 from Microchip Technology Inc. is a Leading Provider of Microcontroller and Analog Semiconductors, providing low-risk product development, lower total system cost and faster time to market for thousands of diverse customer applications worldwide.



Do you follow OK.?
 
Thanks...

Thanks a lot,now I know the pins in the source code RC5,RC4,RC3,RC2,RC1,RC0 are conected to lcd and one pin for the contrast.
Thanks for help ericgibbs
Regards macobt
 
macobt said:
Thanks a lot,now I know the pins in the source code RC5,RC4,RC3,RC2,RC1,RC0 are conected to lcd and one pin for the contrast.
Thanks for help ericgibbs
Regards macobt
Click to expand...

hi,
The 'contrast' should be a 10k pot, connected across +5V and 0V, with the pot wiper to the contrast pin.

Adjust the pot for best contrast on the LCD.

EDIT: dont forget the PORTA.5 pin to the LCD enable pin
 
Last edited:
macobt said:
Thanks a lot,now I know the pins in the source code RC5,RC4,RC3,RC2,RC1,RC0 are conected to lcd and one pin for the contrast.
Thanks for help ericgibbs
Regards macobt
Click to expand...

can u provied hex code ?...............
 
Status
Not open for further replies.

Similar threads

G
  • Question
Constant current circuit
Replies
18
Views
2K
danadak
M
  • Question
Lcd display does not show any text.
2
Replies
31
Views
2K
mouse22
M
MPLABX , and USB tools
Replies
5
Views
3K
Pommie
P
Current Limiting Resistor
2 3
Replies
41
Views
5K
tumbleweed
T
F
  • Question
Issue with Interfacing LCD with PIC16F877A
2
Replies
22
Views
3K
Farhaad
F
Menu
Log in
Register
Cookies are required to use this site. You must accept them to continue using the site. Learn more…