PIC .... The next stage

Hey Guys,

I'm a little lost with regards to micro controllers. I have studied them on and off for a few years now. I have written code in assembler and designed my own circuits. The problem I have is that all of my projects have been quite simple i.e. binary to hex converts, binary clocks etc. Reading these forums to see what other people are upto, I find it fascinating that people integrate their hobby micro controllers to mobile phones and gps systems etc.

I feel a bit of a fool for asking this question, but how do I take the next step to more complex projects like you guys are upto? I would say my circuit theory is ok and so to is my programming but going that extra step is proving difficult. I want to push myself and keep learning but which direction should I head?

Cheers Guys,

Talcum

You could check out my tutorials, which might give you a few ideas?.

There are two directions I would recommend. If you want to stay with Assembly, look at projects that need serial communication or graphics (e.g., GLCD). If you want to expand your programming ability,look at learning C. Ian Rogers has translated Nigel's excellent tutorials into C, which should be a good start.

https://www.electro-tech-online.com/threads/directorial-antenna.467/

John

Thanks guys,

Nigel - Thanks for that ill have a look. Your local to me as well

Jpanhalt - I did C at uni. I don't know if its worth going back to C or staying on assembly. I suppose I'm in a good situation either way. I must say LCDs and GLCD's are wetting my taste buds. Where's a good place to start?

Talcum said:

Thanks guys,

Nigel - Thanks for that ill have a look. Your local to me as well

Click to expand...

Yes, only just over 20 miles from Nottingham, and it's the city I visit most.