Continue to Site

Welcome to our site!

Electro Tech is an online community (with over 170,000 members) who enjoy talking about and building electronic circuits, projects and gadgets. To participate you need to register. Registration is free. Click here to register now.

  • Welcome to our site! Electro Tech is an online community (with over 170,000 members) who enjoy talking about and building electronic circuits, projects and gadgets. To participate you need to register. Registration is free. Click here to register now.

Pic 18f4431 Oscillator Problem

Status
Not open for further replies.

2exposantThom

New Member
Hello, I'm trying to configure a PIC18F4431 using an external oscillator
However, when I scope the OSC1 and OSC2 pins, the signals are sticked to 5V ....
The oscillator used seems to be the internal one.

Someone could help me ??

thanks
 
Hello, I'm trying to configure a PIC18F4431 using an external oscillator
However, when I scope the OSC1 and OSC2 pins, the signals are sticked to 5V ....
The oscillator used seems to be the internal one.

Someone could help me ??

thanks

In which case you've not set the config fuses correctly, check the datasheet for how they should be set.

Presumably you're using a x10 probe when scoping the oscillator pins?, using a x1 probe commonly stops the oscillator running.
 
Status
Not open for further replies.

Latest threads

New Articles From Microcontroller Tips

Back
Top