I iela New Member Nov 28, 2008 #1 i want build temperature (LM35DZ) and humidity (A0545) monitoring using PIC 16F877 and then transmit the result to computer...i want use PICbasic compiler..plzz help me.. tq... Last edited: Nov 28, 2008
i want build temperature (LM35DZ) and humidity (A0545) monitoring using PIC 16F877 and then transmit the result to computer...i want use PICbasic compiler..plzz help me.. tq...
D Diver300 Well-Known Member Most Helpful Member Nov 29, 2008 #2 Do it one stage at a time.... Write some code in Basic that adds up and stuff Get the PIC to turn on an output Get the PIC to read an analog input Check that by getting it to turn on a digital output when the voltage is over half. Get the PIC to output something fixed to the serial port Check that with a computer or an oscilloscope Wire up the sensors and check that the voltages are in the right range Get the PIC to convert the analog signal and output it on the serial port.
Do it one stage at a time.... Write some code in Basic that adds up and stuff Get the PIC to turn on an output Get the PIC to read an analog input Check that by getting it to turn on a digital output when the voltage is over half. Get the PIC to output something fixed to the serial port Check that with a computer or an oscilloscope Wire up the sensors and check that the voltages are in the right range Get the PIC to convert the analog signal and output it on the serial port.
I iela New Member Nov 30, 2008 #3 i use transceiver to transmit the data from PIC to pc...i want to build wireless sensor node..