Philips 21PT165A/13 identify Capacitor

Status
Not open for further replies.
M

mrfomt

New Member
Hello.
Trying to fix a Philips CRT TV. Have replaced a few bad capacitors. But having problem with one of them. The text on the capacitor is gone, can only see 50v on it. On the pcb it should be mounted at 2753
I have checked the service manual for the capacitor but can’t find it anywhere,
Service manual:

14PT165_21PT165.pdf

drive.google.com

Not the resistor 5746 either that looks suspicious.
Maybe I’m blind





 
Sort by date Sort by votes
It looks pretty clearly marked as 1uF - there can't be anything in front of the '1' as you don't get 11uF or 101uF etc.

If you'd posted a picture of the bottom of the board, we could see where it connects to, and compare that to the circuit - or you could simply do it yourself.

Presumably it's just a different revision of the PCB, which as I presume you know is the teletext decoder? - so not much use now anyway. Does the set work OK with it unplugged?, some sets do, some require wire links fitting if the board isn't there.
 
Upvote 0 Downvote
It's the wrong manual.
The board uses an SAA5246, the manual shows an SAA 5281 & no separate RAM IC.

Also the 5746 part appears to be in inductor, not a resistor.
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

E
  • Question
Is this capacitor bad?
Replies
11
Views
1K
Nigel Goodwin
L
  • Question
Philips 288P6LJEB/27 monitor PSU outputting 8V instead of 12V
Replies
9
Views
2K
Nigel Goodwin
P
Identify component
Replies
1
Views
2K
augustinetez
A
A
  • Question
On a capacitor gets deformed
Replies
1
Views
1K
alec_t
D
Different job Another Chip to identify please
Replies
17
Views
6K
Nigel Goodwin
Menu
Log in
Register
Cookies are required to use this site. You must accept them to continue using the site. Learn more…