Continue to Site

Welcome to our site!

Electro Tech is an online community (with over 170,000 members) who enjoy talking about and building electronic circuits, projects and gadgets. To participate you need to register. Registration is free. Click here to register now.

  • Welcome to our site! Electro Tech is an online community (with over 170,000 members) who enjoy talking about and building electronic circuits, projects and gadgets. To participate you need to register. Registration is free. Click here to register now.

Peristaltic Pump

Status
Not open for further replies.

GabiB

New Member
Hi all
any1 with ideas how to calibrate TBRG rain gauge to adjust screws automatically (raise/low) when operator needed it. what components should i use? is it good idea to Peristaltic pump or motors?
 
I can not understand what you are asking. Is the pump for testing? Peristaltic is unnecessary. Calibration in software will save trouble.
 
What's the nominal tipping volume of the tipping bucket rain gauge (TBRG)? Since you're not calibrating volume per unit time with the adjusting screws, only tipping volume, all you need is a water source with an accurate, scaled volume. This could be a graduated cylinder, a large syringe, Burnett, ... This all depends on the tipping volume and needed accuracy.

Ken
 
Status
Not open for further replies.

Latest threads

New Articles From Microcontroller Tips

Back
Top