Original ICD2 - What headers are needed?

Status
Not open for further replies.

atferrari

Well-Known Member
Most Helpful Member
I would like to have one ICD2 but have no experience with it.

Price is a consideration, but have read (without understanding much about) that different "headers" are needed to cover the different micros.

Can anyone clarify this briefly?

Please:

a) don't ask me to look into the MC documents. Did already but without some pevious insight I couldn't understand what I actually should buy, besides the ICD2 itself.

b) $$$ to afford one, are limited here but don't suggest clones. I don't consider them for the moment.

Thanks
 

The ICD2 has a socket on it, from that you connect a lead to your target board - but your target board has to be designed for this purpose, which is fairly easy, but does place some limitations on the design. If you're not wanting to program in circuit you could make little PCB's (or veroboard) which connect to the programming socket - this could be called 'headers'.


Why not?, is money is limited (and isn't it always?), why spend a LOT more to do the same job?.
 
Simply because...

 
atferrari said:
b) $$$ to afford one, are limited here but don't suggest clones. I don't consider them for the moment.
There is only one original, the Microchip ICD2. It's resonably priced for the target market and a nice device.
The clones target a different market, normally hobbyists and students.
My Inchworm ICD2 is a no frills clone. As simple as it could be designed, but it does work and works well.
Some more expensive clones have USB support, some have buffering for 3.3v PICs, some have programmable VPP, some switch VDD etc...
The real Microchip ICD2 does all this.
Point is all except the Microchip ICD2 are clones.
 
Status
Not open for further replies.
Cookies are required to use this site. You must accept them to continue using the site. Learn more…